ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Enthalpy of Solution of H₂SO₄ and Safety

By the end of the lesson, the learner should be able to:
- Determine heat of solution of concentrated sulphuric(VI) acid
-Apply safety precautions when handling concentrated acids
-Calculate enthalpy considering density and percentage purity
-Explain why experimental values differ from theoretical values

Teacher demonstration: Add 2cm³ concentrated H₂SO₄ to 98cm³ water (NEVER vice versa). Record temperature change. Calculate mass using density (1.84 g/cm³) and purity (98%). Calculate molar heat of solution. Emphasize safety: always add acid to water. Discuss sources of experimental error.

Concentrated H₂SO₄, distilled water, plastic beaker, tissue paper, thermometer, safety equipment

KLB Secondary Chemistry Form 4, Pages 39-41

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Enthalpy of Combustion
Enthalpy of Displacement

By the end of the lesson, the learner should be able to:
- Carry out experiments to determine enthalpy of combustion of ethanol
-Define molar heat of combustion
-Calculate molar enthalpy of combustion from experimental data
-Explain why actual heats are lower than theoretical values

Class experiment: Burn ethanol to heat 100cm³ water. Record mass of ethanol burned and temperature change. Calculate moles of ethanol and heat evolved using ΔH = mcΔT. Determine molar enthalpy of combustion. Compare with theoretical (-1368 kJ/mol). Discuss heat losses to surroundings.

Ethanol, bottles with wicks, glass beakers, tripod stands, thermometers, analytical balance
Zinc powder, 0.5M CuSO₄ solution, plastic beakers, thermometers, analytical balance

KLB Secondary Chemistry Form 4, Pages 41-44

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Enthalpy of Neutralization
Standard Conditions and Standard Enthalpy Changes

By the end of the lesson, the learner should be able to:
- Determine heat of neutralization of HCl with NaOH
-Define molar heat of neutralization
-Compare strong acid/base with weak acid/base combinations
-Write ionic equations including enthalpy changes
- Define standard conditions for measuring enthalpy changes
-Use standard enthalpy notation ΔH°
-Apply correct notation for different types of enthalpy changes
-Explain importance of standardization for comparison

Class experiment: Mix 50cm³ of 2M HCl with 50cm³ of 2M NaOH. Record temperatures and calculate molar heat of neutralization. Repeat with weak acid/base. Compare values: strong + strong ≈ 57.2 kJ/mol, weak combinations give lower values. Write H⁺(aq) + OH⁻(aq) → H₂O(l) ΔH = -57.2 kJ mol⁻¹.
Q/A: Review enthalpy measurements. Define standard conditions: 25°C (298K) and 1 atmosphere (101.325 kPa). Introduce ΔH° notation where θ denotes standard. Show subscripts: ΔH°c (combustion), ΔH°f (formation), ΔH°neut (neutralization), ΔH°sol (solution). Practice using correct notation in thermochemical equations.

2M HCl, 2M NaOH, 2M ethanoic acid, 2M ammonia solution, measuring cylinders, thermometers, plastic beakers
Student books, standard enthalpy data examples, notation practice exercises

KLB Secondary Chemistry Form 4, Pages 47-49
KLB Secondary Chemistry Form 4, Pages 49

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Hess's Law - Theory and Energy Cycles
Hess's Law Calculations

By the end of the lesson, the learner should be able to:
- State Hess's Law
-Explain that enthalpy change is independent of reaction route
-Draw energy cycle diagrams
-Apply Hess's Law to determine enthalpy of formation

Introduce Hess's Law: "Energy change in converting reactants to products is same regardless of route." Use methane formation showing Route 1 (direct combustion) vs Route 2 (formation then combustion). Draw energy cycle. Calculate ΔH°f(CH₄) = -965 + (-890) - (-75) = -75 kJ/mol. Practice with CO formation example.

Energy cycle diagrams for methane and CO formation, combustion data, calculators
Worked examples, combustion data tables, graph paper for diagrams, calculators

KLB Secondary Chemistry Form 4, Pages 49-52

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Lattice Energy and Hydration Energy

By the end of the lesson, the learner should be able to:
- Explain relationship between heat of solution, hydration and lattice energy
-Define lattice energy and hydration energy
-Draw energy cycles for dissolving ionic compounds
-Calculate heat of solution using energy cycles

Explain NaCl dissolution: lattice breaks (endothermic) then ions hydrate (exothermic). Define lattice energy as energy when ionic compound forms from gaseous ions. Define hydration energy as energy when gaseous ions become hydrated. Draw energy cycle: ΔH(solution) = ΔH(lattice) + ΔH(hydration). Calculate for NaCl: +781 + (-774) = +7 kJ/mol.

Energy cycle diagrams, hydration diagram (Fig 2.17), Tables 2.6 and 2.7 with lattice/hydration energies

KLB Secondary Chemistry Form 4, Pages 54-56

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES

Definition and Types of Fuels

By the end of the lesson, the learner should be able to:
- Define a fuel
-Classify fuels into solid, liquid and gaseous types
-Define heating value of a fuel
-Calculate heating values from molar enthalpies of combustion

Define fuel as "substance producing useful energy in chemical/nuclear reaction." Classify: solids (coal, charcoal, wood), liquids (petrol, kerosene, diesel), gases (natural gas, biogas, LPG). Define heating value as "heat energy per unit mass." Calculate for ethanol: -1360 kJ/mol ÷ 46 g/mol = 30 kJ/g. Compare values from Table 2.8.

Examples of local fuels, Table 2.8 showing heating values, calculators

KLB Secondary Chemistry Form 4, Pages 56-57

ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES
ENERGY CHANGES IN PHYSICAL AND CHEMICAL PROCESSES
REACTION RATES AND REVERSIBLE REACTIONS

Fuel Selection Factors
Environmental Effects and Safety
Definition of Reaction Rate and Collision Theory

By the end of the lesson, the learner should be able to:
- State and explain factors that influence choice of a fuel
-Compare suitability of fuels for different purposes
-Explain fuel selection for domestic use vs specialized applications
-Apply selection criteria to local situations
- Explain environmental effects of fuels
-Describe formation and effects of acid rain
-Identify measures to reduce pollution
-State safety precautions for fuel handling

Discuss seven factors: heating value, ease of combustion, availability, transportation, storage, environmental effects, cost. Compare wood/charcoal for domestic use (cheap, available, safe, slow burning) vs methylhydrazine for rockets (rapid burning, high heat 4740 kJ/mol, easy ignition). Students analyze best fuels for their local area.
Discuss pollutants: SO₂, NO₂ forming acid rain affecting buildings, lakes, vegetation. CO₂ causing global warming and climate change. Pollution reduction: catalytic converters, unleaded petrol, zero emission vehicles, alternative fuels. Safety: ventilation for charcoal, proper gas storage, fuel storage location, avoiding spills.

Fuel comparison tables, local fuel cost data, examples of specialized fuel applications
Pictures of environmental damage, pollution reduction examples, safety guideline charts
Examples of fast/slow reactions, energy diagram templates, chalk/markers for diagrams

KLB Secondary Chemistry Form 4, Pages 57
KLB Secondary Chemistry Form 4, Pages 57-58

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Concentration on Reaction Rate

By the end of the lesson, the learner should be able to:
- Explain the effect of concentration on reaction rates
-Investigate reaction of magnesium with different concentrations of sulphuric acid
-Illustrate reaction rates graphically and interpret experimental data
-Calculate concentrations and plot graphs of concentration vs time

Class experiment: Label 4 conical flasks A-D. Add 40cm³ of 2M H₂SO₄ to A, dilute others with water (30+10, 20+20, 10+30 cm³). Drop 2cm magnesium ribbon into each, time complete dissolution. Record in Table 3.1. Calculate concentrations, plot graph. Explain: higher concentration → more collisions → faster reaction.

4 conical flasks, 2M H₂SO₄, distilled water, magnesium ribbon, stopwatch, measuring cylinders, graph paper

KLB Secondary Chemistry Form 4, Pages 65-67

REACTION RATES AND REVERSIBLE REACTIONS

Change of Reaction Rate with Time

By the end of the lesson, the learner should be able to:
- Describe methods used to measure rate of reaction
-Investigate how reaction rate changes as reaction proceeds
-Plot graphs of volume of gas vs time
-Calculate average rates at different time intervals

Class experiment: React 2cm magnesium ribbon with 100cm³ of 0.5M HCl in conical flask. Collect H₂ gas in graduated syringe as in Fig 3.4. Record gas volume every 30 seconds for 5 minutes in Table 3.2. Plot volume vs time graph. Calculate average rates between time intervals. Explain why rate decreases as reactants are consumed.

0.5M HCl, magnesium ribbon, conical flask, gas collection apparatus, graduated syringe, stopwatch, graph paper

KLB Secondary Chemistry Form 4, Pages 67-70

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Temperature on Reaction Rate

By the end of the lesson, the learner should be able to:
- Explain the effect of temperature on reaction rates
-Investigate temperature effects using sodium thiosulphate and HCl
-Plot graphs of time vs temperature and 1/time vs temperature
-Apply collision theory to explain temperature effects

Class experiment: Place 30cm³ of 0.15M Na₂S₂O₃ in flasks at room temp, 30°C, 40°C, 50°C, 60°C. Mark cross on paper under flask. Add 5cm³ of 2M HCl, time until cross disappears. Record in Table 3.4. Plot time vs temperature and 1/time vs temperature graphs. Explain: higher temperature → more kinetic energy → more effective collisions.

0.15M Na₂S₂O₃, 2M HCl, conical flasks, water baths at different temperatures, paper with cross marked, stopwatch, thermometers

KLB Secondary Chemistry Form 4, Pages 70-73

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Surface Area on Reaction Rate
Effect of Catalysts on Reaction Rate
Effect of Light and Pressure on Reaction Rate

By the end of the lesson, the learner should be able to:
- Explain the effect of surface area on reaction rates
-Investigate reaction of marble chips vs marble powder with HCl
-Compare reaction rates using gas collection
-Relate particle size to surface area and collision frequency
- Identify reactions affected by light
-Investigate effect of light on silver bromide decomposition
-Explain effect of pressure on gaseous reactions
-Give examples of photochemical reactions

Class experiment: React 2.5g marble chips with 50cm³ of 1M HCl, collect CO₂ gas using apparatus in Fig 3.10. Record gas volume every 30 seconds. Repeat with 2.5g marble powder. Record in Table 3.5. Plot both curves on same graph. Write equation: CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂. Explain: smaller particles → larger surface area → more collision sites → faster reaction.
Teacher demonstration: Mix KBr and AgNO₃ solutions to form AgBr precipitate. Divide into 3 test tubes: place one in dark cupboard, one on bench, one in direct sunlight. Observe color changes after 10 minutes. Write equations. Discuss photochemical reactions: photography, Cl₂ + H₂, photosynthesis. Explain pressure effects on gaseous reactions through compression.

Marble chips, marble powder, 1M HCl, gas collection apparatus, balance, conical flasks, measuring cylinders, graph paper
20-volume H₂O₂, MnO₂ powder, gas collection apparatus, balance, conical flasks, filter paper, measuring cylinders
0.1M KBr, 0.05M AgNO₃, test tubes, dark cupboard, direct light source, examples of photochemical reactions

KLB Secondary Chemistry Form 4, Pages 73-76
KLB Secondary Chemistry Form 4, Pages 78-80

REACTION RATES AND REVERSIBLE REACTIONS

Reversible Reactions

By the end of the lesson, the learner should be able to:
- State examples of simple reversible reactions
-Investigate heating of hydrated copper(II) sulphate
-Write equations for reversible reactions using double arrows
-Distinguish between reversible and irreversible reactions

Class experiment: Heat CuSO₄·5H₂O crystals in boiling tube A, collect liquid in tube B as in Fig 3.15. Observe color changes: blue → white + colorless liquid. Pour liquid back into tube A, observe return to blue. Write equation with double arrows: CuSO₄·5H₂O ⇌ CuSO₄ + 5H₂O. Give other examples: NH₄Cl ⇌ NH₃ + HCl. Compare with irreversible reactions.

CuSO₄·5H₂O crystals, boiling tubes, delivery tube, heating source, test tube holder

KLB Secondary Chemistry Form 4, Pages 78-80

REACTION RATES AND REVERSIBLE REACTIONS

Chemical Equilibrium
Le Chatelier's Principle and Effect of Concentration

By the end of the lesson, the learner should be able to:
- Explain chemical equilibrium
-Define dynamic equilibrium
-Investigate acid-base equilibrium using indicators
-Explain why equilibrium appears static but is actually dynamic

Experiment: Add 0.5M NaOH to 2cm³ in boiling tube with universal indicator. Add 0.5M HCl dropwise until green color (neutralization point). Continue adding base then acid alternately, observe color changes. Explain equilibrium as state where forward and backward reaction rates are equal. Use NH₄Cl ⇌ NH₃ + HCl example to show dynamic nature. Introduce equilibrium symbol ⇌.

0.5M NaOH, 0.5M HCl, universal indicator, boiling tubes, droppers, examples of equilibrium systems
Bromine water, 2M NaOH, 2M HCl, beakers, chromate/dichromate solutions for demonstration

KLB Secondary Chemistry Form 4, Pages 80-82

REACTION RATES AND REVERSIBLE REACTIONS

Effect of Pressure and Temperature on Equilibrium

By the end of the lesson, the learner should be able to:
- Explain effect of pressure changes on equilibrium
-Explain effect of temperature changes on equilibrium
-Investigate NO₂/N₂O₄ equilibrium with temperature
-Apply Le Chatelier's Principle to industrial processes

Teacher demonstration: React copper turnings with concentrated HNO₃ to produce NO₂ gas in test tube. Heat and cool the tube, observe color changes: brown ⇌ pale yellow representing 2NO₂ ⇌ N₂O₄. Explain pressure effects using molecule count. Show Table 3.7 with pressure effects. Discuss temperature effects: heating favors endothermic direction, cooling favors exothermic direction. Use Table 3.8.

Copper turnings, concentrated HNO₃, test tubes, heating source, ice bath, gas collection apparatus, safety equipment

KLB Secondary Chemistry Form 4, Pages 84-87

REACTION RATES AND REVERSIBLE REACTIONS
REACTION RATES AND REVERSIBLE REACTIONS
ELECTROCHEMISTRY

Industrial Applications - Haber Process
Industrial Applications - Contact Process
Redox Reactions and Oxidation Numbers

By the end of the lesson, the learner should be able to:
- Apply equilibrium principles to Haber Process
-Explain optimum conditions for ammonia manufacture
-Calculate effect of temperature and pressure on yield
-Explain role of catalysts in industrial processes
- Apply equilibrium principles to Contact Process
-Explain optimum conditions for sulphuric acid manufacture
-Compare different industrial equilibrium processes
-Evaluate economic factors in industrial chemistry

Analyze Haber Process: N₂ + 3H₂ ⇌ 2NH₃ ΔH = -92 kJ/mol. Apply Le Chatelier's Principle: high pressure favors forward reaction (4 molecules → 2 molecules), low temperature favors exothermic forward reaction but slows rate. Explain optimum conditions: 450°C temperature, 200 atmospheres pressure, iron catalyst. Discuss removal of NH₃ to shift equilibrium right. Economic considerations.
Analyze Contact Process: 2SO₂ + O₂ ⇌ 2SO₃ ΔH = -197 kJ/mol. Apply principles: high pressure favors forward reaction (3 molecules → 2 molecules), low temperature favors exothermic reaction. Explain optimum conditions: 450°C, atmospheric pressure, V₂O₅ catalyst, 96% conversion. Compare with Haber Process. Discuss catalyst choice and economic factors.

Haber Process flow diagram, equilibrium data showing temperature/pressure effects on NH₃ yield, industrial catalyst information
Contact Process flow diagram, comparison table with Haber Process, catalyst effectiveness data
Iron filings, 1M CuSO₄, 1M FeSO₄, 2M NaOH, 20V H₂O₂, test tubes

KLB Secondary Chemistry Form 4, Pages 87-89
KLB Secondary Chemistry Form 4, Pages 89

ELECTROCHEMISTRY

Oxidation Numbers in Naming and Redox Identification
Displacement Reactions - Metals and Halogens
Electrochemical Cells and Cell Diagrams

By the end of the lesson, the learner should be able to:
Apply oxidation numbers to systematic naming
- Use oxidation numbers to identify redox reactions
- Distinguish oxidizing and reducing agents
- Track electron movement in reactions

Worked examples: Calculate oxidation numbers in complex compounds
- Practice IUPAC naming
- Exercise 4.1: Identify redox reactions using oxidation numbers
- Name compounds with variable oxidation states

Compound charts, calculators, student books, practice exercises
Various metals (Ca, Mg, Zn, Fe, Pb, Cu), metal salt solutions, halogens (Cl₂, Br₂, I₂), halide solutions
Metal electrodes, 1M metal salt solutions, voltmeters, salt bridges, connecting wires

KLB Secondary Chemistry Form 4, Pages 109-116

ELECTROCHEMISTRY

Standard Electrode Potentials
Calculating Cell EMF and Predicting Reactions

By the end of the lesson, the learner should be able to:
Define standard electrode potential
- Describe standard hydrogen electrode
- List standard conditions
- Use electrode potential tables effectively

Study standard hydrogen electrode setup
- Discussion of standard conditions (25°C, 1M, 1 atm)
- Introduction to electrode potential series
- Practice reading potential tables

Standard electrode potential table, diagrams, charts showing standard conditions
Calculators, electrode potential data, worked examples, practice problems

KLB Secondary Chemistry Form 4, Pages 129-133

ELECTROCHEMISTRY

Types of Electrochemical Cells
Electrolysis of Aqueous Solutions I
Electrolysis of Aqueous Solutions II
Effect of Electrode Material on Electrolysis

By the end of the lesson, the learner should be able to:
Describe functioning of primary and secondary cells
- Compare different cell types
- Explain fuel cell operation
- State applications of electrochemical cells
Compare inert vs reactive electrodes
- Investigate electrode dissolution
- Explain electrode selection importance
- Analyze copper purification process

Study dry cell (Le Clanche) and lead-acid accumulator
- Hydrogen-oxygen fuel cell operation
- Compare cell types and applications
- Discussion on advantages/disadvantages
Experiment 4.9: Electrolysis of CuSO₄ with carbon vs copper electrodes
- Weigh electrodes before/after
- Observe color changes
- Discussion on electrode effects

Cell diagrams, sample batteries, charts showing cell applications
Dilute and concentrated NaCl solutions, carbon electrodes, gas collection tubes, test equipment
U-tube apparatus, 2M H₂SO₄, 0.5M MgSO₄, platinum/carbon electrodes, gas syringes
Copper and carbon electrodes, 3M CuSO₄ solution, accurate balance, beakers, connecting wires

KLB Secondary Chemistry Form 4, Pages 138-141
KLB Secondary Chemistry Form 4, Pages 141-148

ELECTROCHEMISTRY

Factors Affecting Electrolysis

By the end of the lesson, the learner should be able to:
Identify factors affecting preferential discharge
- Explain electrochemical series influence
- Discuss concentration and electrode effects
- Predict electrolysis products

Review electrochemical series and discharge order
- Analysis of concentration effects on product formation
- Summary of all factors affecting electrolysis
- Practice prediction problems

Electrochemical series chart, summary tables, practice exercises, student books

KLB Secondary Chemistry Form 4, Pages 153-155

ELECTROCHEMISTRY

Applications of Electrolysis I
Applications of Electrolysis II

By the end of the lesson, the learner should be able to:
Describe electrolytic extraction of reactive metals
- Explain electroplating process
- Apply electrolysis principles to metal coating
- Design electroplating setup

Discussion: Extraction of Na, Mg, Al by electrolysis
- Practical: Electroplate iron nail with copper
- Calculate plating requirements
- Industrial applications

Iron nails, copper electrodes, CuSO₄ solution, power supply, industrial process diagrams
Flow charts, mercury cell diagrams, environmental impact data, industrial case studies

KLB Secondary Chemistry Form 4, Pages 155-157

ELECTROCHEMISTRY

Faraday's Laws and Quantitative Electrolysis

By the end of the lesson, the learner should be able to:
State Faraday's laws of electrolysis
- Define Faraday constant
- Calculate mass deposited in electrolysis
- Relate electricity to amount of substance

Experiment 4.10: Quantitative electrolysis of CuSO₄
- Measure mass vs electricity passed
- Calculate Faraday constant
- Verify Faraday's laws

Accurate balance, copper electrodes, CuSO₄ solution, ammeter, timer, calculators

KLB Secondary Chemistry Form 4, Pages 161-164

ELECTROCHEMISTRY

Electrolysis Calculations I
Electrolysis Calculations II

By the end of the lesson, the learner should be able to:
Calculate mass of products from electrolysis
- Determine volumes of gases evolved
- Apply Faraday's laws to numerical problems
- Solve basic electrolysis calculations
Determine charge on ions from electrolysis data
- Calculate current-time relationships
- Solve complex multi-step problems
- Apply concepts to industrial situations

Worked examples: Mass and volume calculations
- Problems involving different ions
- Practice with Faraday constant
- Basic numerical problems
Complex problems: Determine ionic charges
- Current-time-mass relationships
- Multi-step calculations
- Industrial calculation examples

Calculators, worked examples, practice problems, gas volume data, Faraday constant
Calculators, complex problem sets, industrial data, student books

KLB Secondary Chemistry Form 4, Pages 161-164

ELECTROCHEMISTRY
METALS
METALS

Advanced Applications and Problem Solving
Chief Ores of Metals and General Extraction Methods
Occurrence and Extraction of Sodium

By the end of the lesson, the learner should be able to:
Solve examination-type electrochemistry problems
- Apply all concepts in integrated problems
- Analyze real-world electrochemical processes
- Practice complex calculations

Comprehensive problems combining redox, cells, and electrolysis
- Past examination questions
- Industrial case study analysis
- Advanced problem-solving techniques

Past papers, comprehensive problem sets, industrial case studies, calculators
Chart of metal ores, ore samples if available, Table 5.1, flotation apparatus demonstration
Down's cell diagram, charts showing sodium occurrence, electrode reaction equations

KLB Secondary Chemistry Form 4, Pages 108-164

METALS

Occurrence and Extraction of Aluminium I
Extraction of Aluminium II - Electrolysis

By the end of the lesson, the learner should be able to:
Describe occurrence and ores of aluminium
- Explain ore concentration process
- Write equations for bauxite purification
- Describe amphoteric nature of aluminium oxide

Study aluminium occurrence and bauxite composition
- Demonstration of amphoteric properties
- Equations for bauxite dissolution in NaOH
- Discussion on impurity removal

Bauxite samples, NaOH solution, charts showing aluminium extraction steps, chemical equations
Electrolytic cell diagram, cryolite samples, graphite electrodes, energy consumption data

KLB Secondary Chemistry Form 4, Pages 142-143

METALS

Occurrence and Extraction of Iron
Extraction of Zinc
Extraction of Lead and Copper

By the end of the lesson, the learner should be able to:
Describe iron ores and occurrence
- Explain blast furnace operation
- Write equations for iron extraction reactions
- Describe slag formation process

Study iron ores and blast furnace structure
- Analysis of temperature zones in furnace
- Write reduction equations
- Discussion on limestone role and slag formation

Blast furnace diagram, iron ore samples, coke, limestone, temperature zone charts
Zinc ore samples, flow charts showing both methods, electrolytic cell diagrams
Lead and copper ore samples, extraction flow charts, electrolytic purification diagrams

KLB Secondary Chemistry Form 4, Pages 143-145

METALS

Physical Properties of Metals
Chemical Properties I - Reaction with Air
Chemical Properties II - Reaction with Water

By the end of the lesson, the learner should be able to:
Compare physical properties of sodium, aluminium, zinc, iron and copper
- Explain metallic bonding effects
- Relate structure to properties
- Analyze property data
Test metal reactions with cold water and steam
- Arrange metals by reactivity
- Explain aluminium's apparent unreactivity
- Write chemical equations for reactions

Study Table 5.2 - physical properties comparison
- Discussion on metallic bonding and electron sea model
- Analysis of melting points, conductivity, and density trends
Experiment 5.2: Test metals with cold water and steam
- Use Table 5.4 for observations
- Test solutions with indicators
- Arrange metals in reactivity order

Table 5.2, metal samples, conductivity apparatus, density measurement equipment
Deflagrating spoons, metal samples (Na, Al, Zn, Fe, Cu), Bunsen burners, safety equipment
Metal samples, cold water, steam generator, test tubes, universal indicator, safety equipment

KLB Secondary Chemistry Form 4, Pages 151-152
KLB Secondary Chemistry Form 4, Pages 154-156

METALS

Chemical Properties III - Reaction with Chlorine
Chemical Properties IV - Reaction with Acids

By the end of the lesson, the learner should be able to:
Investigate metal reactions with chlorine gas
- Write equations for chloride formation
- Compare reaction vigor
- Observe product characteristics

Experiment 5.3: React hot metals with chlorine gas (FUME CUPBOARD)
- Observe color changes and fume formation
- Record all observations
- Write balanced equations

Chlorine gas, gas jars, metal samples, tongs, deflagrating spoons, fume cupboard, safety equipment
Various acids (dilute and concentrated), metal strips, test tubes, gas collection apparatus, safety equipment

KLB Secondary Chemistry Form 4, Pages 156-157

METALS

Uses of Metals I - Sodium and Aluminium

By the end of the lesson, the learner should be able to:
State uses of sodium and its compounds
- Explain aluminium applications
- Relate properties to uses
- Describe alloy formation and uses

Discussion on sodium uses in industry
- Aluminium applications in transport and construction
- Study duralumin and other alloys
- Property-use relationships

Charts showing metal applications, alloy samples, aircraft parts, cooking vessels

KLB Secondary Chemistry Form 4, Pages 158-159

METALS

Uses of Metals II - Zinc, Copper and Iron

By the end of the lesson, the learner should be able to:
Explain galvanization process
- Describe copper electrical applications
- Compare iron, steel, and cast iron uses
- Analyze alloy compositions and properties

Study galvanization and rust prevention
- Copper in electrical applications
- Different types of steel and their compositions
- Alloy property comparisons

Galvanized sheets, copper wires, steel samples, alloy composition charts, brass and bronze samples

KLB Secondary Chemistry Form 4, Pages 159-161

METALS
METALS
ORGANIC CHEMISTRY II
ORGANIC CHEMISTRY II

Steel Types and Alloys
Environmental Effects of Metal Extraction
Introduction to Alkanols and Nomenclature
Isomerism in Alkanols

By the end of the lesson, the learner should be able to:
Compare cast iron, wrought iron, and steel
- Analyze different steel compositions
- Explain alloy property enhancement
- Describe specialized steel applications
Identify environmental impacts of mining
- Explain pollution from metal extraction
- Describe waste management strategies
- Discuss NEMA regulations in Kenya

Study cast iron, wrought iron, mild steel, and stainless steel
- Analyze carbon content effects
- Specialized steels for tools and instruments
- Discussion on alloy design
Analysis of mining environmental impact
- Air, water, and land pollution from extraction
- Waste management and slag utilization
- NEMA role and regulations

Steel samples with different compositions, carbon content charts, specialized tools, stainless steel items
Environmental impact case studies, pollution images, NEMA regulation documents, waste management examples
Molecular models, Table 6.1 and 6.2, alkanol structure charts, student books
Isomer structure charts, molecular models, practice worksheets, student books

KLB Secondary Chemistry Form 4, Pages 159-161
KLB Secondary Chemistry Form 4, Pages 161-162

ORGANIC CHEMISTRY II

Laboratory Preparation of Ethanol
Industrial Preparation and Physical Properties

By the end of the lesson, the learner should be able to:
Describe fermentation process
- Prepare ethanol in laboratory
- Write equation for glucose fermentation
- Explain role of yeast and conditions needed

Experiment 6.1: Fermentation of sugar solution with yeast
- Set up apparatus for 2-3 days
- Observe gas evolution
- Test for CO₂ with lime water
- Smell final product

Sugar, yeast, warm water, conical flask, delivery tube, lime water, thermometer
Table 6.3, industrial process diagrams, ethene structure models, property comparison charts

KLB Secondary Chemistry Form 4, Pages 171-172

ORGANIC CHEMISTRY II

Chemical Properties of Alkanols I
Chemical Properties of Alkanols II
Uses of Alkanols and Health Effects

By the end of the lesson, the learner should be able to:
Test reactions of ethanol with various reagents
- Write equations for ethanol reactions
- Identify products formed
- Explain reaction mechanisms

Experiment 6.2: Test ethanol with burning, universal indicator, sodium metal, acids
- Record observations in Table 6.4
- Write balanced equations
- Discuss reaction types

Ethanol, sodium metal, universal indicator, concentrated H₂SO₄, ethanoic acid, test tubes
Acidified potassium chromate/manganate, ethanoic acid, concentrated H₂SO₄, heating apparatus
Charts showing alkanol uses, health impact data, methylated spirit samples, discussion materials

KLB Secondary Chemistry Form 4, Pages 173-175

ORGANIC CHEMISTRY II

Introduction to Alkanoic Acids
Laboratory Preparation of Ethanoic Acid

By the end of the lesson, the learner should be able to:
Define alkanoic acids and functional group
- Apply nomenclature rules
- Draw structural formulae
- Compare with alkanols

Study carboxyl group (-COOH) structure
- Practice naming using IUPAC rules
- Complete Table 6.5 and 6.6
- Compare functional groups of alkanols and acids

Alkanoic acid structure charts, Table 6.5 and 6.6, molecular models, student books
Ethanol, KMnO₄, concentrated H₂SO₄, distillation apparatus, thermometer, round-bottom flask

KLB Secondary Chemistry Form 4, Pages 177-179

ORGANIC CHEMISTRY II

Physical and Chemical Properties of Alkanoic Acids
Esterification and Uses of Alkanoic Acids

By the end of the lesson, the learner should be able to:
Investigate chemical reactions of ethanoic acid
- Test with various reagents
- Write chemical equations
- Analyze acid strength
Explain ester formation process
- Write esterification equations
- State uses of alkanoic acids
- Prepare simple esters

Experiment following Table 6.8: Test ethanoic acid with indicators, metals, carbonates, bases
- Record observations
- Write equations
- Discuss weak acid behavior
Complete esterification experiments
- Study concentrated H₂SO₄ as catalyst
- Write general esterification equation
- Discuss applications in food, drugs, synthetic fibres

2M ethanoic acid, universal indicator, Mg strip, Na₂CO₃, NaOH, phenolphthalein, test tubes
Ethanoic acid, ethanol, concentrated H₂SO₄, test tubes, heating apparatus, cold water

KLB Secondary Chemistry Form 4, Pages 180-182
KLB Secondary Chemistry Form 4, Pages 182-183

ORGANIC CHEMISTRY II

Introduction to Detergents and Soap Preparation
Mode of Action of Soap and Hard Water Effects

By the end of the lesson, the learner should be able to:
Define detergents and classify types
- Explain saponification process
- Prepare soap in laboratory
- Compare soapy and soapless detergents

Study soap vs soapless detergent differences
- Experiment 6.5: Saponify castor oil with NaOH
- Add salt for salting out
- Test soap formation

Castor oil, 4M NaOH, NaCl, evaporating dish, water bath, stirring rod, filter paper
Soap samples, distilled water, hard water (CaCl₂/MgSO₄ solutions), test tubes, demonstration materials

KLB Secondary Chemistry Form 4, Pages 183-186

ORGANIC CHEMISTRY II

Soapless Detergents and Environmental Effects

By the end of the lesson, the learner should be able to:
Explain soapless detergent preparation
- Compare advantages/disadvantages
- Discuss environmental impact
- Analyze pollution effects

Study alkylbenzene sulphonate preparation
- Compare Table 6.9 - soap vs soapless
- Discussion on eutrophication and biodegradability
- Environmental awareness

Flow charts of detergent manufacture, Table 6.9, environmental impact data, sample detergents

KLB Secondary Chemistry Form 4, Pages 188-191

ORGANIC CHEMISTRY II

Introduction to Polymers and Addition Polymerization

By the end of the lesson, the learner should be able to:
Define polymers, monomers, and polymerization
- Explain addition polymerization
- Draw polymer structures
- Calculate polymer properties

Study polymer concept and terminology
- Practice drawing addition polymers from monomers
- Examples: polyethene, polypropene, PVC
- Calculate molecular masses

Polymer samples, monomer structure charts, molecular models, calculators, polymer formation diagrams

KLB Secondary Chemistry Form 4, Pages 191-195

ORGANIC CHEMISTRY II

Addition Polymers - Types and Properties
Condensation Polymerization and Natural Polymers
Polymer Properties and Applications

By the end of the lesson, the learner should be able to:
Identify different addition polymers
- Draw structures from monomers
- Name common polymers
- Relate structure to properties
Compare advantages and disadvantages of synthetic polymers
- State uses of different polymers
- Discuss environmental concerns
- Analyze polymer selection

Study polystyrene, PTFE, perspex formation
- Practice identifying monomers from polymer structures
- Work through polymer calculation examples
- Properties analysis
Study Table 6.10 - polymer uses
- Advantages: strength, lightness, moldability
- Disadvantages: non-biodegradability, toxic gases
- Application analysis

Various polymer samples, structure identification exercises, calculation worksheets, Table 6.10
Nylon samples, rubber samples, condensation reaction diagrams, natural polymer examples
Table 6.10, polymer application samples, environmental impact studies, product examples

KLB Secondary Chemistry Form 4, Pages 195-197
KLB Secondary Chemistry Form 4, Pages 200-201

ORGANIC CHEMISTRY II

Comprehensive Problem Solving and Integration

By the end of the lesson, the learner should be able to:
Solve complex problems involving alkanols and acids
- Apply knowledge to practical situations
- Integrate polymer concepts
- Practice examination questions

Worked examples on organic synthesis
- Problem-solving on isomers, reactions, polymers
- Integration of all unit concepts
- Practice examination-style questions

Comprehensive problem sets, past examination papers, calculators, organic chemistry summary charts

KLB Secondary Chemistry Form 4, Pages 167-201