Mixtures, Elements and Compounds

Structure of the atom - General structure.

By the end of the lesson, the learner should be able to:

- Describe the general structure of an atom
- Identify the subatomic particles in an atom
- Show interest in exploring the structure of atoms

- Observe a diagram showing the structure of an atom
- Discuss in groups the general structure of atoms
- Identify the particles shown in the atom

How is the structure of the atom important?

- Mentor Integrated Science (pg. 1)
- Charts showing structure of an atom
- Digital resources
- Models of atoms

- Observation - Oral questions - Written assignments

Mixtures, Elements and Compounds

Structure of the atom - Meaning of an atom
Structure of the atom - Atomic number
Structure of the atom - Mass number

By the end of the lesson, the learner should be able to:

- Explain the meaning of an atom
- Describe the characteristics of subatomic particles in an atom
- Appreciate the importance of understanding atomic structure

- Discuss in groups and find out the meaning of an atom
- Research on the differences between subatomic particles
- Share findings with classmates

How is the structure of the atom important?

- Mentor Integrated Science (pg. 2)
- Digital resources
- Charts showing structure of atoms
- Mentor Integrated Science (pg. 3)
- Periodic table
- Charts
- Mentor Integrated Science (pg. 4)
- Charts showing atomic structure

- Observation - Oral questions - Written assignments

Mixtures, Elements and Compounds

Structure of the atom - Representation of elements
Structure of the atom - Energy levels
Structure of the atom - Electron arrangement
Structure of the atom - Electron arrangements of elements

By the end of the lesson, the learner should be able to:

- Write chemical symbols with atomic and mass numbers
- Interpret chemical symbols with atomic and mass numbers
- Appreciate the importance of standard atomic notation

- Complete a table showing representation of elements
- Practice writing chemical symbols with atomic and mass numbers
- Interpret given chemical symbols

How is the structure of the atom important?

- Mentor Integrated Science (pg. 5)
- Periodic table
- Digital resources
- Charts
- Mentor Integrated Science (pg. 6)
- Charts showing energy levels
- Models
- Charts showing electron arrangements
- Mentor Integrated Science (pg. 7)

- Observation - Written assignments - Peer assessment

Mixtures, Elements and Compounds

Structure of the atom - Energy level diagrams
Structure of the atom - Electron arrangement practice
Structure of the atom - Modelling structures

By the end of the lesson, the learner should be able to:

- Interpret energy level diagrams
- Draw energy level diagrams for different elements
- Show interest in representing atomic structures

- Study energy level diagrams in the course book
- Practice drawing energy level diagrams
- Discuss the meaning of energy level diagrams

How is the structure of the atom important?

- Mentor Integrated Science (pg. 7)
- Digital resources
- Charts showing energy level diagrams
- Models
- Mentor Integrated Science (pg. 8)
- Periodic table
- Exercise sheets
- Locally available materials
- Sample models

- Observation - Practical work - Written assignments

Mixtures, Elements and Compounds

Structure of the atom - Metals and non-metals identification
Structure of the atom - Metals and non-metals classification
Structure of the atom - Assessment

By the end of the lesson, the learner should be able to:

- Identify metals and non-metals using electron arrangement
- Explain the relationship between outer electrons and metallic properties
- Show interest in classifying elements

- Study examples of elements with their electron arrangements
- Identify patterns in electron arrangements of metals and non-metals
- Classify given elements as metals or non-metals

How is the structure of the atom important?

- Mentor Integrated Science (pg. 9)
- Digital resources
- Periodic table
- Charts showing electron arrangements
- Charts showing classification of elements
- Mentor Integrated Science (pg. 10)
- Assessment items
- Models

- Observation - Written work - Oral questions

Mixtures, Elements and Compounds

Metals and Alloys - Identifying metals
Metals and Alloys - Classification of materials
Metals and Alloys - Physical properties (state)
Metals and Alloys - Malleability

By the end of the lesson, the learner should be able to:

- Identify metals and non-metals in the environment
- Classify materials as metallic or non-metallic
- Appreciate the variety of materials in the environment

- Observe pictures of items made from different materials
- Identify and classify materials as metallic or non-metallic
- Walk around the school to identify metallic and non-metallic items

How are alloys important in day-to-day life?

- Mentor Integrated Science (pg. 15)
- Samples of metallic and non-metallic items
- Digital resources
- Pictures
- Samples of different materials
- Worksheets
- Mentor Integrated Science (pg. 16)
- Samples of different metals
- Charts
- Mentor Integrated Science (pg. 17)
- Hammer or mallet
- Safety equipment

- Observation - Oral questions - Written assignments

Mixtures, Elements and Compounds

Metals and Alloys - Ductility
Metals and Alloys - Electrical conductivity
Metals and Alloys - Thermal conductivity

By the end of the lesson, the learner should be able to:

- Investigate the ductility of different metals
- Explain the property of ductility in metals
- Value safety when investigating metal properties

- Carry out an investigation on ductility of different metals
- Record observations when metals are stretched
- Compare the ductility of different metals

How are alloys important in day-to-day life?

- Mentor Integrated Science (pg. 17)
- Metal wires
- Pliers
- Safety equipment
- Mentor Integrated Science (pg. 18)
- Simple circuit components
- Metal samples
- Digital resources
- Mentor Integrated Science (pg. 19)
- Heat source
- Candle wax or cooking fat

- Observation - Practical work - Written reports

Mixtures, Elements and Compounds

Metals and Alloys - Causes of rusting
Metals and Alloys - Effects of rusting
Metals and Alloys - Control of rusting

By the end of the lesson, the learner should be able to:

- Investigate causes of rusting in iron
- Explain conditions necessary for rusting to occur
- Appreciate the importance of understanding rusting

- Set up experiments to investigate rusting
- Record observations on rusting under different conditions
- Discuss factors that cause rusting

How are alloys important in day-to-day life?

- Mentor Integrated Science (pg. 20)
- Iron nails
- Test tubes
- Water and oil
- Digital resources
- Mentor Integrated Science (pg. 21)
- Pictures of rusted items
- Actual rusted items
- Mentor Integrated Science (pg. 22)
- Items with rust prevention
- Pictures

- Observation - Practical work - Written reports

Mixtures, Elements and Compounds

Metals and Alloys - Investigating rusting
Metals and Alloys - Uses of metals
Metals and Alloys - Identifying alloys

By the end of the lesson, the learner should be able to:

- Carry out an investigation on rusting in the environment
- Record observations on rusted items
- Show concern about the effects of rusting

- Walk around the school or neighborhood to observe rusted items
- Record observations on rusted items
- Write a report on effects of rusting

How are alloys important in day-to-day life?

- Mentor Integrated Science (pg. 22)
- Camera (if available)
- Observation sheets
- Rusted items
- Mentor Integrated Science (pg. 23)
- Digital resources
- Pictures showing uses of metals
- Charts
- Mentor Integrated Science (pg. 24)
- Samples of items made from alloys
- Pictures

- Observation - Field activity - Written reports

Mixtures, Elements and Compounds

Metals and Alloys - Alloys in locality
Metals and Alloys - Composition of alloys
Metals and Alloys - Uses of alloys
Metals and Alloys - Observing alloy uses

By the end of the lesson, the learner should be able to:

- Collect items made from alloys in the locality
- Identify the alloys used to make different items
- Appreciate the use of alloys in everyday items

- Walk around school to identify items made from alloys
- Collect or take photographs of items made from alloys
- Discuss why the items are made from alloys

How are alloys important in day-to-day life?

- Mentor Integrated Science (pg. 24)
- Items made from alloys
- Camera (if available)
- Digital resources
- Mentor Integrated Science (pg. 25)
- Pictures of different alloys
- Charts
- Mentor Integrated Science (pg. 26)
- Pictures showing uses of alloys
- Mentor Integrated Science (pg. 27)
- Observation sheets

- Observation - Field activity - Project work

Mixtures, Elements and Compounds

Metals and Alloys - Assessment
Water hardness - Physical properties
Water hardness - Water sources

By the end of the lesson, the learner should be able to:

- Describe physical properties of metals and alloys
- Explain uses of various metals and alloys
- Show confidence in applying knowledge of metals and alloys

- Answer assessment questions on metals and alloys
- Complete self-assessment checklist
- Identify properties and uses of metals and alloys

How are alloys important in day-to-day life?

- Mentor Integrated Science (pg. 32)
- Assessment items
- Digital resources
- Samples of metals and alloys
- Mentor Integrated Science (pg. 33)
- Water samples from different sources
- Containers for samples
- Charts
- Water samples

- Written tests - Oral questions - Observation

Mixtures, Elements and Compounds

Water hardness - Colour and odour
Water hardness - Investigating color and odor
Water hardness - Boiling point

By the end of the lesson, the learner should be able to:

- Determine the colour and odour of clean water
- Distinguish between clean and dirty water
- Show interest in water quality

- Discuss the colour and odour of water from different sources
- Observe the colour of water in a clear container
- Compare the colour and odour of different water samples

Why is hard water preferred for drinking?

- Mentor Integrated Science (pg. 34)
- Water samples
- Clear containers
- White paper
- Worksheets
- Mentor Integrated Science (pg. 35)
- Thermometer
- Heat source
- Beaker
- Water

- Observation - Practical work - Oral questions

Mixtures, Elements and Compounds

Water hardness - Hard and soft water
Water hardness - Differences
Water hardness - Advantages of soft water
Water hardness - Hard water advantages

By the end of the lesson, the learner should be able to:

- Distinguish between hard and soft water
- Explain the difference in lathering ability
- Show interest in investigating water properties

- Compare lathering of soap in different water samples
- Distinguish between hard and soft water based on lathering
- Discuss differences between hard and soft water

Why is hard water preferred for drinking?

- Mentor Integrated Science (pg. 36)
- Soap
- Water samples
- Beakers
- Digital resources
- Mentor Integrated Science (pg. 37)
- Charts
- Mentor Integrated Science (pg. 38)
- Debate materials
- Mentor Integrated Science (pg. 39)
- Research materials

- Observation - Practical work - Oral questions

Mixtures, Elements and Compounds

Water hardness - Methods of softening
Water hardness - Boiling method
Water hardness - Chemical method

By the end of the lesson, the learner should be able to:

- Identify methods of softening hard water
- Explain different water softening processes
- Show interest in water treatment methods

- Search for information on methods of softening hard water
- Discuss different methods of water softening
- Summarize findings on water softening methods

Why is hard water preferred for drinking?

- Mentor Integrated Science (pg. 40)
- Digital resources
- Charts
- Water samples
- Mentor Integrated Science (pg. 41)
- Hard water samples
- Heat source
- Beakers
- Soap
- Mentor Integrated Science (pg. 42)
- Washing soda

- Observation - Oral presentations - Written assignments

Mixtures, Elements and Compounds
Living Things and their Environment

Water hardness - Distillation method
Water hardness - Applications
Nutrition in plants - External structure of the leaf

By the end of the lesson, the learner should be able to:

- Demonstrate how to soften hard water by distillation
- Explain how distillation removes hardness
- Observe safety measures during distillation

- Set up distillation apparatus
- Distill hard water and test the distillate
- Compare properties of hard water and distilled water

Why is hard water preferred for drinking?

- Mentor Integrated Science (pg. 44)
- Distillation apparatus
- Hard water samples
- Heat source
- Soap
- Mentor Integrated Science (pg. 45)
- Digital resources
- Charts
- Pictures of water applications
- Mentor Integrated Science (pg. 49)
- Charts showing external structure of leaf
- Fresh leaves

- Observation - Practical work - Written reports

Living Things and their Environment

Nutrition in plants - Functions of leaf parts
Nutrition in plants - Observing leaf structures
Nutrition in plants - Leaf adaptations for photosynthesis
Nutrition in plants - Internal structure of the leaf

By the end of the lesson, the learner should be able to:

- Describe the functions of external leaf parts
- Relate the structure of leaf parts to their functions
- Appreciate the diversity of leaf structures

- Discuss the functions of each external part of the leaf
- Relate the structure of leaf parts to their functions
- Share findings with classmates

What is the importance of photosynthesis in nature?

- Mentor Integrated Science (pg. 50)
- Charts showing external structure of leaf
- Digital resources
- Fresh leaves
- Hand lens
- Drawing materials
- Mentor Integrated Science (pg. 51)
- Charts showing leaf adaptations
- Reference materials
- Mentor Integrated Science (pg. 52)
- Charts showing internal structure of leaf
- Models

- Observation - Written assignments - Oral presentations

Living Things and their Environment

Nutrition in plants - Leaf tissues for photosynthesis
Nutrition in plants - Internal adaptations for photosynthesis
Nutrition in plants - Structure of chloroplast

By the end of the lesson, the learner should be able to:

- Explain the functions of internal leaf tissues
- Relate internal leaf structures to photosynthesis
- Appreciate the complexity of leaf tissues

- Discuss the functions of different internal leaf tissues
- Relate the structure of internal leaf tissues to photosynthesis
- Share findings with classmates

What is the importance of photosynthesis in nature?

- Mentor Integrated Science (pg. 53)
- Charts showing internal leaf tissues
- Digital resources
- Models
- Mentor Integrated Science (pg. 54)
- Charts showing internal leaf adaptations
- Reference materials
- Mentor Integrated Science (pg. 55)
- Charts showing structure of chloroplast

- Observation - Written assignments - Oral presentations

Living Things and their Environment

Nutrition in plants - Chloroplast adaptations
Nutrition in plants - Process of photosynthesis
Nutrition in plants - Conditions for photosynthesis

By the end of the lesson, the learner should be able to:

- Explain how chloroplasts are adapted for photosynthesis
- Identify chloroplast structures from photomicrographs
- Show interest in microscopic structures

- Study a photomicrograph of a chloroplast
- Identify parts of the chloroplast from the photomicrograph
- Discuss how chloroplasts are adapted for photosynthesis

What is the importance of photosynthesis in nature?

- Mentor Integrated Science (pg. 56)
- Photomicrographs of chloroplasts
- Charts showing chloroplast structure
- Digital resources
- Mentor Integrated Science (pg. 57)
- Charts showing photosynthesis process
- Reference materials
- Mentor Integrated Science (pg. 58)
- Charts showing conditions for photosynthesis

- Observation - Written assignments - Oral presentations

Living Things and their Environment

Nutrition in plants - Stages of photosynthesis
Nutrition in plants - Testing for starch
Nutrition in plants - Light and photosynthesis

By the end of the lesson, the learner should be able to:

- Describe the light and dark stages of photosynthesis
- Explain where each stage occurs in the chloroplast
- Show curiosity in understanding photosynthetic stages

- Study a chart showing stages of photosynthesis
- Discuss the light and dark stages of photosynthesis
- Explain the products of each stage of photosynthesis

What is the importance of photosynthesis in nature?

- Mentor Integrated Science (pg. 59)
- Charts showing stages of photosynthesis
- Digital resources
- Reference materials
- Mentor Integrated Science (pg. 60)
- Apparatus for testing starch in leaves
- Chemicals (iodine solution)
- Fresh leaves
- Heat source
- Mentor Integrated Science (pg. 61)
- Potted plants
- Aluminum foil/carbon paper
- Apparatus for testing starch
- Chemicals

- Observation - Written assignments - Oral questions

Living Things and their Environment

Nutrition in plants - Carbon (IV) oxide and photosynthesis
Nutrition in plants - Chlorophyll and photosynthesis
Nutrition in plants - Importance of photosynthesis
Nutrition in plants - Environmental impact of photosynthesis

By the end of the lesson, the learner should be able to:

- Investigate whether carbon (IV) oxide is necessary for photosynthesis
- Control variables in an experiment
- Practice safety measures when conducting experiments

- Design an experiment to investigate the effect of carbon (IV) oxide on photosynthesis
- Set up the experiment with appropriate controls
- Record and analyze results
- Draw conclusions from the experiment

What is the importance of photosynthesis in nature?

- Mentor Integrated Science (pg. 62)
- Potted plants
- Conical flasks with corks
- Potassium hydroxide solution
- Apparatus for testing starch
- Mentor Integrated Science (pg. 63)
- Variegated leaves
- Chemicals
- Heat source
- Mentor Integrated Science (pg. 64)
- Digital resources
- Charts showing importance of photosynthesis
- Reference materials
- Mentor Integrated Science (pg. 65)
- Charts showing carbon cycle

- Observation - Practical work - Written reports

Living Things and their Environment

Nutrition in animals - Modes of nutrition in animals
Nutrition in animals - Parasitic mode of nutrition
Nutrition in animals - Saprophytic mode of nutrition

By the end of the lesson, the learner should be able to:

- Explain the meaning of nutrition in animals
- Identify different modes of nutrition in animals
- Appreciate the diversity of feeding mechanisms in animals

- Observe pictures of animals with different feeding mechanisms
- Discuss modes of nutrition in animals
- Categorize different animals based on how they feed
- Search for information on animal nutrition using digital devices or print materials

How do different animals feed?

- Mentor Integrated Science Grade 9 (pg. 73)
- Digital devices
- Pictures of animals with different feeding habits
- Mentor Integrated Science Grade 9 (pg. 74)
- Pictures of parasitic animals
- Pictures/videos of saprophytic organisms

- Observation - Oral questions - Written assignments - Group presentations

Living Things and their Environment

Nutrition in animals - Symbiotic mode of nutrition
Nutrition in animals - Holozoic mode of nutrition
Nutrition in animals - Types of teeth (structure)

By the end of the lesson, the learner should be able to:

- Explain symbiotic mode of nutrition
- Identify organisms that exhibit symbiotic relationships in feeding
- Appreciate the interdependence of organisms in nutrition

- Observe pictures of symbiotic relationships
- Discuss examples of symbiotic relationships in feeding
- Research on symbiotic relationships
- Create presentations on symbiotic relationships

How do different animals feed?

- Mentor Integrated Science Grade 9 (pg. 75)
- Digital devices
- Pictures of symbiotic relationships
- Pictures of animals with holozoic feeding
- Mentor Integrated Science Grade 9 (pg. 76)
- Dental models or charts

- Observation - Oral questions - Written assignments - Group presentations

Living Things and their Environment

Nutrition in animals - Types of teeth (functions)
Nutrition in animals - Dentition in animals (homodont and heterodont)
Nutrition in animals - Dentition in carnivores

By the end of the lesson, the learner should be able to:

- Describe the functions of different types of teeth
- Relate the structure of teeth to their functions
- Show interest in understanding tooth function

- Discuss the functions of different types of teeth
- Using models, demonstrate how different teeth perform their functions
- Make presentations on the relationship between structure and function of teeth

How is food digested in the human body?

- Mentor Integrated Science Grade 9 (pg. 77)
- Dental models or charts
- Digital devices
- Mentor Integrated Science Grade 9 (pg. 78)
- Pictures of animal teeth
- Mentor Integrated Science Grade 9 (pg. 79)
- Pictures/models of carnivore teeth

- Observation - Oral questions - Written assignments - Presentations

Living Things and their Environment

Nutrition in animals - Dentition in herbivores
Nutrition in animals - Dentition in omnivores

By the end of the lesson, the learner should be able to:

- Describe the dentition of herbivores
- Identify adaptations of herbivore teeth to their feeding habits
- Show interest in understanding herbivore dentition

- Observe pictures/models of herbivore teeth
- Discuss the adaptations of herbivore teeth to their feeding habits
- Research on examples of herbivores and their dentition
- Make presentations on herbivore dentition

How is food digested in the human body?

- Mentor Integrated Science Grade 9 (pg. 80)
- Pictures/models of herbivore teeth
- Digital devices
- Mentor Integrated Science Grade 9 (pg. 81)
- Pictures/models of omnivore teeth

- Observation - Oral questions - Written assignments - Presentations

Living Things and their Environment

Nutrition in animals - Process of digestion (ingestion)

By the end of the lesson, the learner should be able to:

- Explain the process of ingestion in human beings
- Describe the role of teeth and salivary glands in ingestion
- Appreciate the complexity of the digestive process

- Discuss the process of ingestion
- Using charts/models, identify structures involved in ingestion
- Demonstrate the role of teeth and saliva in ingestion
- Research on the process of ingestion

How is food digested in the human body?

- Mentor Integrated Science Grade 9 (pg. 82)
- Charts/models of the digestive system
- Digital devices

- Observation - Oral questions - Written assignments - Demonstrations

Living Things and their Environment

Nutrition in animals - Process of digestion (digestion)
Nutrition in animals - Process of digestion (absorption)

By the end of the lesson, the learner should be able to:

- Explain the process of digestion in human beings
- Identify organs involved in digestion and their functions
- Appreciate the importance of proper digestion

- Discuss the process of digestion in different parts of the digestive system
- Using charts/models, identify organs involved in digestion
- Research on mechanical and chemical digestion
- Present findings to the class

How is food digested in the human body?

- Mentor Integrated Science Grade 9 (pg. 83)
- Charts/models of the digestive system
- Digital devices

- Observation - Oral questions - Written assignments - Presentations

Living Things and their Environment

Nutrition in animals - Process of digestion (assimilation)
Nutrition in animals - Process of digestion (egestion)

By the end of the lesson, the learner should be able to:

- Explain the process of assimilation in human beings
- Describe how absorbed nutrients are utilized in the body
- Value the importance of proper nutrition for body functions

- Discuss the process of assimilation
- Research on how different nutrients are used in the body
- Create presentations on the process of assimilation
- Discuss the importance of proper nutrition

How is food digested in the human body?

- Mentor Integrated Science Grade 9 (pg. 84)
- Charts of the circulatory system
- Digital devices
- Charts/models of the large intestine

- Observation - Oral questions - Written assignments - Presentations

Living Things and their Environment

Reproduction in plants - Parts of a flower
Reproduction in plants - Functions of parts of a flower
Reproduction in plants - Meaning of pollination

By the end of the lesson, the learner should be able to:

- Identify external parts of a flower
- Draw and label parts of a flower
- Appreciate the complexity of flower structure

- Collect and observe flowers from the school compound
- Identify and name the parts of the flowers
- Draw and label the parts of a flower
- Discuss the functions of the parts of a flower

How does reproduction in plants occur?

- Mentor Integrated Science Grade 9 (pg. 86)
- Fresh flowers
- Hand lens
- Drawing materials
- Mentor Integrated Science Grade 9 (pg. 87)
- Flower models or charts
- Digital devices
- Mentor Integrated Science Grade 9 (pg. 88)
- Videos on pollination
- Charts showing pollination

- Observation - Drawing assessment - Oral questions - Written assignments

Living Things and their Environment

Reproduction in plants - Types of pollination (self-pollination)
Reproduction in plants - Types of pollination (cross-pollination)
Reproduction in plants - Agents of pollination (insects)

By the end of the lesson, the learner should be able to:

- Explain self-pollination
- Identify plants that undergo self-pollination
- Value the diversity in plant reproduction strategies

- Discuss self-pollination
- Use diagrams/charts to illustrate self-pollination
- Research on examples of plants that undergo self-pollination
- Create presentations on self-pollination

How does reproduction in plants occur?

- Mentor Integrated Science Grade 9 (pg. 89)
- Charts showing self-pollination
- Digital devices
- Charts showing cross-pollination
- Mentor Integrated Science Grade 9 (pg. 90)
- Pictures/videos of insect pollinators

- Observation - Oral questions - Written assignments - Group presentations

Living Things and their Environment

Reproduction in plants - Agents of pollination (birds, other animals)
Reproduction in plants - Agents of pollination (wind, water)
Reproduction in plants - Adaptations of flowers to insect pollination

By the end of the lesson, the learner should be able to:

- Identify birds and other animals as agents of pollination
- Explain how birds and other animals aid in pollination
- Value the diversity of pollination mechanisms

- Observe pictures/videos of birds and other animals as pollinators
- Discuss how birds and other animals aid in pollination
- Research on examples of flowers pollinated by birds and other animals
- Present findings to class

How does reproduction in plants occur?

- Mentor Integrated Science Grade 9 (pg. 90)
- Pictures/videos of bird and animal pollinators
- Digital devices
- Mentor Integrated Science Grade 9 (pg. 91)
- Pictures/videos of wind and water pollination
- Mentor Integrated Science Grade 9 (pg. 92)
- Fresh insect-pollinated flowers
- Pictures of insect-pollinated flowers
- Hand lens

- Observation - Oral questions - Written assignments - Group presentations

Living Things and their Environment

Reproduction in plants - Adaptations of flowers to wind pollination
Reproduction in plants - Effects of agrochemicals on pollinating agents

By the end of the lesson, the learner should be able to:

- Identify adaptations of flowers to wind pollination
- Explain how these adaptations facilitate wind pollination
- Value the diversity in plant adaptations

- Observe wind-pollinated flowers
- Identify and discuss adaptations to wind pollination
- Compare insect-pollinated and wind-pollinated flowers
- Create presentations on adaptations to wind pollination

How does reproduction in plants occur?

- Mentor Integrated Science Grade 9 (pg. 93)
- Fresh wind-pollinated flowers
- Pictures of wind-pollinated flowers
- Hand lens
- Mentor Integrated Science Grade 9 (pg. 94)
- Digital devices
- Articles on effects of agrochemicals on pollinators

- Observation - Oral questions - Written assignments - Group presentations

Living Things and their Environment

Reproduction in plants - Fertilization in flowering plants

By the end of the lesson, the learner should be able to:

- Explain the process of fertilization in flowering plants
- Describe the journey of pollen tube to the ovule
- Appreciate the complexity of plant reproduction

- Watch videos on fertilization in flowering plants
- Use diagrams/charts to illustrate the fertilization process
- Discuss the journey of the pollen tube to the ovule
- Create presentations on fertilization in flowering plants

How does reproduction in plants occur?

- Mentor Integrated Science Grade 9 (pg. 95)
- Videos on fertilization in plants
- Charts showing fertilization process
- Digital devices

- Observation - Oral questions - Written assignments - Group presentations

Living Things and their Environment

Reproduction in plants - Seed formation in flowering plants
Reproduction in plants - Fruit formation in flowering plants

By the end of the lesson, the learner should be able to:

- Explain the process of seed formation in flowering plants
- Identify the changes that occur during seed formation
- Value the importance of seeds in plant reproduction

- Watch videos on seed formation
- Use diagrams/charts to illustrate seed formation
- Observe different stages of seed development if available
- Discuss the changes that occur during seed formation

How does reproduction in plants occur?

- Mentor Integrated Science Grade 9 (pg. 96)
- Videos on seed formation
- Charts showing seed formation
- Samples of seeds at different developmental stages
- Mentor Integrated Science Grade 9 (pg. 97)
- Videos on fruit formation
- Charts showing fruit formation
- Samples of fruits at different developmental stages

- Observation - Oral questions - Written assignments - Drawing assessment

Living Things and their Environment

Reproduction in plants - Fruit and seed dispersal (meaning and importance)
Reproduction in plants - Modes of fruit and seed dispersal (animals)

By the end of the lesson, the learner should be able to:

- Explain the meaning of fruit and seed dispersal
- Describe the importance of fruit and seed dispersal
- Value the role of dispersal in plant reproduction

- Discuss the meaning of fruit and seed dispersal
- Research on the importance of fruit and seed dispersal
- Debate on what would happen if seeds were not dispersed
- Present findings to class

How does reproduction in plants occur?

- Mentor Integrated Science Grade 9 (pg. 98)
- Digital devices
- Charts showing seed dispersal
- Mentor Integrated Science Grade 9 (pg. 99)
- Samples of animal-dispersed fruits and seeds
- Pictures of animal dispersal

- Observation - Oral questions - Written assignments - Debate assessment

Living Things and their Environment

Reproduction in plants - Modes of fruit and seed dispersal (wind, water)

By the end of the lesson, the learner should be able to:

- Explain wind and water dispersal of fruits and seeds
- Identify fruits and seeds dispersed by wind and water
- Show interest in different dispersal mechanisms

- Collect and observe fruits and seeds dispersed by wind and water
- Discuss the adaptations of these fruits and seeds for wind and water dispersal
- Research on examples of wind and water dispersed fruits and seeds
- Create presentations on wind and water dispersal

How does reproduction in plants occur?

- Mentor Integrated Science Grade 9 (pg. 100)
- Samples of wind and water-dispersed fruits and seeds
- Digital devices
- Pictures of wind and water dispersal

- Observation - Oral questions - Written assignments - Collection assessment

Living Things and their Environment

Reproduction in plants - Modes of fruit and seed dispersal (self-dispersal mechanisms)
Reproduction in plants - Adaptations of fruits and seeds for dispersal

By the end of the lesson, the learner should be able to:

- Explain self-dispersal mechanisms in fruits and seeds
- Identify fruits and seeds that use self-dispersal mechanisms
- Appreciate the diversity in dispersal mechanisms

- Observe fruits that use self-dispersal mechanisms
- Discuss the adaptations of these fruits and seeds for self-dispersal
- Research on examples of self-dispersed fruits and seeds
- Create presentations on self-dispersal mechanisms

How does reproduction in plants occur?

- Mentor Integrated Science Grade 9 (pg. 101)
- Samples of self-dispersed fruits and seeds
- Digital devices
- Pictures of self-dispersal mechanisms
- Mentor Integrated Science Grade 9 (pg. 102)
- Various fruit and seed samples
- Hand lens
- Sorting trays

- Observation - Oral questions - Written assignments - Group presentations

Living Things and their Environment

Reproduction in plants - Role of flowers in nature
The interdependence of life - Components of the environment
The interdependence of life - Biotic factors (predation)

By the end of the lesson, the learner should be able to:

- Explain the role of flowers in nature
- Describe the ecological importance of flowers
- Appreciate the value of flowers in the ecosystem

- Discuss the role of flowers in nature
- Research on the ecological importance of flowers
- Debate on the value of flowers in the ecosystem
- Create presentations on the role of flowers in nature

How does reproduction in plants occur?

- Mentor Integrated Science Grade 9 (pg. 105)
- Digital devices
- Pictures of different flowers and their roles
- Charts on flower roles in ecosystems
- Mentor Integrated Science Grade 9 (pg. 107)
- School grounds
- Notebooks
- Mentor Integrated Science Grade 9 (pg. 108)
- Pictures/videos of predator-prey relationships

- Observation - Oral questions - Written assignments - Group presentations

Living Things and their Environment

The interdependence of life - Biotic factors (parasitism)
The interdependence of life - Biotic factors (symbiosis)
The interdependence of life - Biotic factors (competition)

By the end of the lesson, the learner should be able to:

- Explain parasitism as a biotic interaction
- Identify examples of parasitic relationships
- Value the diversity of relationships in ecosystems

- Discuss parasitism as a biotic interaction
- Observe pictures/videos of parasitic relationships
- Research on examples of parasitic relationships
- Present findings to class

What is the role of living and non-living factors in environments?

- Mentor Integrated Science Grade 9 (pg. 109)
- Pictures/videos of parasitic relationships
- Digital devices
- Mentor Integrated Science Grade 9 (pg. 110)
- Pictures/videos of symbiotic relationships
- Mentor Integrated Science Grade 9 (pg. 111)
- Pictures/videos of competitive relationships

- Observation - Oral questions - Written assignments - Group presentations

Living Things and their Environment

The interdependence of life - Biotic factors (saprophytic)
The interdependence of life - Abiotic factors (temperature)
The interdependence of life - Abiotic factors (light)

By the end of the lesson, the learner should be able to:

- Explain saprophytic relationships as a biotic interaction
- Identify examples of saprophytic organisms
- Appreciate the role of saprophytes in ecosystems

- Discuss saprophytic relationships
- Observe pictures/videos of saprophytic organisms
- Research on examples of saprophytic organisms
- Create presentations on saprophytic relationships

What is the role of living and non-living factors in environments?

- Mentor Integrated Science Grade 9 (pg. 112)
- Pictures/videos of saprophytic organisms
- Digital devices
- Mentor Integrated Science Grade 9 (pg. 113)
- Thermometers
- Pictures/videos of organisms in different temperature zones
- Mentor Integrated Science Grade 9 (pg. 114)
- Light meters (if available)
- Plants grown under different light conditions

- Observation - Oral questions - Written assignments - Group presentations

Living Things and their Environment

The interdependence of life - Abiotic factors (water)
The interdependence of life - Abiotic factors (wind)

By the end of the lesson, the learner should be able to:

- Explain how water availability affects living organisms
- Describe adaptations of organisms to different water conditions
- Show interest in water conservation

- Discuss how water availability affects living organisms
- Research on adaptations of organisms to different water conditions
- Compare plants from arid and wet environments
- Present findings to class

What is the role of living and non-living factors in environments?

- Mentor Integrated Science Grade 9 (pg. 115)
- Pictures of plants from arid and wet environments
- Water samples
- Digital devices
- Mentor Integrated Science Grade 9 (pg. 116)
- Pictures of plants from windy and sheltered environments

- Observation - Oral questions - Written assignments - Group presentations

Living Things and their Environment

The interdependence of life - Abiotic factors (atmospheric pressure, pH and salinity)
The interdependence of life - Energy flow (food chains)

By the end of the lesson, the learner should be able to:

- Explain how atmospheric pressure, pH and salinity affect living organisms
- Describe adaptations of organisms to these abiotic factors
- Value adaptations to different environments

- Discuss how atmospheric pressure, pH and salinity affect living organisms
- Research on adaptations of organisms to these factors
- Test pH and salinity of different water samples if possible
- Present findings to class

What is the role of living and non-living factors in environments?

- Mentor Integrated Science Grade 9 (pg. 117)
- pH testing equipment (if available)
- Water samples of different salinity
- Digital devices
- Mentor Integrated Science Grade 9 (pg. 118)
- Charts showing food chains
- Pictures of local organisms

- Observation - Oral questions - Practical assessment - Written assignments

Living Things and their Environment

The interdependence of life - Energy flow (food webs)

By the end of the lesson, the learner should be able to:

- Explain the concept of food webs
- Construct simple food webs
- Value the complexity of feeding relationships in ecosystems

- Discuss the concept of food webs
- Identify how food chains interconnect to form food webs
- Construct simple food webs using organisms observed in the local environment
- Present food webs to class

What is the role of living and non-living factors in environments?

- Mentor Integrated Science Grade 9 (pg. 119)
- Charts showing food webs
- Pictures of local organisms
- Digital devices

- Observation - Oral questions - Food web construction assessment - Written assignments

Living Things and their Environment

The interdependence of life - Human activities (habitat change)
The interdependence of life - Human activities (hunting and poaching)

By the end of the lesson, the learner should be able to:

- Explain how human activities lead to habitat change
- Describe the effects of habitat change on ecosystems
- Show concern for habitat conservation

- Discuss human activities that lead to habitat change
- Research on the effects of habitat change on ecosystems
- Debate on the balance between development and conservation
- Present findings to class

What is the role of living and non-living factors in environments?

- Mentor Integrated Science Grade 9 (pg. 120)
- Pictures showing habitat change
- Digital devices
- Newspaper articles
- Mentor Integrated Science Grade 9 (pg. 121)
- Pictures related to hunting and poaching

- Observation - Oral questions - Debate assessment - Written assignments

Living Things and their Environment

The interdependence of life - Human activities (introduction of new living things)
The interdependence of life - Interrelationships in Kenya national parks

By the end of the lesson, the learner should be able to:

- Explain the effects of introducing new species to ecosystems
- Describe examples of invasive species and their impacts
- Appreciate the importance of biodiversity conservation

- Discuss the effects of introducing new species to ecosystems
- Research on examples of invasive species and their impacts
- Debate on the management of invasive species
- Present findings to class

What is the role of living and non-living factors in environments?

- Mentor Integrated Science Grade 9 (pg. 122)
- Pictures of invasive species
- Digital devices
- Newspaper articles
- Mentor Integrated Science Grade 9 (pg. 123)
- Pictures of Kenya national parks
- Maps of Kenya national parks

- Observation - Oral questions - Debate assessment - Written assignments

Living Things and their Environment
Force and Energy

The interdependence of life - Role of decomposers in ecosystems
Curved mirrors - Types of curved mirrors

By the end of the lesson, the learner should be able to:

- Explain the role of decomposers in ecosystems
- Identify examples of decomposers
- Appreciate the importance of decomposers in nutrient cycling

- Discuss the role of decomposers in ecosystems
- Observe pictures/videos of decomposers in action
- Research on examples of decomposers
- Create a model of nutrient cycling showing the role of decomposers

What is the role of living and non-living factors in environments?

- Mentor Integrated Science Grade 9 (pg. 125)
- Pictures/videos of decomposers
- Digital devices
- Materials to create models
- Mentor Integrated Science (pg. 133)
- Shiny spoons
- Digital resources on curved mirrors

- Observation - Oral questions - Model assessment - Written assignments

Force and Energy

Curved mirrors - Terms associated with concave mirrors
Curved mirrors - Determining focal length of concave mirror
Curved mirrors - Ray diagrams for concave mirrors

By the end of the lesson, the learner should be able to:

- Identify the terms associated with concave mirrors
- Describe the structure of a concave mirror
- Show interest in understanding the properties of concave mirrors

- Discuss the terms associated with concave mirrors (aperture, center of curvature, pole, principal axis, principal focus, focal length)
- Draw and label the parts of a concave mirror
- Watch animations explaining the terms associated with concave mirrors

How is the structure of the concave mirror important in image formation?

- Mentor Integrated Science (pg. 135)
- Digital resources
- Charts showing the structure of a concave mirror
- Mentor Integrated Science (pg. 137)
- Concave mirrors
- Rulers
- White screens or plain paper
- Mirror holders
- Mentor Integrated Science (pg. 140)
- Plain paper
- Pencils
- Drawing instruments

- Observation - Drawings and labels - Written assignments

Force and Energy

Curved mirrors - Image formation by concave mirrors (beyond C)
Curved mirrors - Image formation by concave mirrors (at C)
Curved mirrors - Image formation by concave mirrors (between C and F)
Curved mirrors - Image formation by concave mirrors (at F)

By the end of the lesson, the learner should be able to:

- Draw ray diagrams to locate images when objects are placed beyond C
- Describe the characteristics of images formed
- Appreciate the systematic approach in determining image properties

- Draw ray diagrams to locate images when objects are placed beyond the center of curvature
- Use the ray diagrams to determine image characteristics (size, position, nature)
- Compare theoretical predictions with practical observations

What are the characteristics of images formed when objects are placed beyond the center of curvature?

- Mentor Integrated Science (pg. 143)
- Concave mirrors
- Drawing instruments
- Digital resources
- Mentor Integrated Science (pg. 144)
- Mentor Integrated Science (pg. 145)
- Mentor Integrated Science (pg. 147)

- Observation - Ray diagram assessment - Written descriptions

Force and Energy

Curved mirrors - Image formation by concave mirrors (between F and P)
Curved mirrors - Characteristics of images formed by concave mirrors
Curved mirrors - Locating images formed by concave mirrors experimentally

By the end of the lesson, the learner should be able to:

- Draw ray diagrams to locate images when objects are placed between F and P
- Describe the characteristics of images formed
- Appreciate the practical applications of this image formation

- Draw ray diagrams to locate images when objects are placed between the principal focus and the pole
- Determine the characteristics of images formed
- Discuss practical applications like magnifying mirrors

What are the characteristics of images formed when objects are placed between the principal focus and the pole?

- Mentor Integrated Science (pg. 148)
- Concave mirrors
- Drawing instruments
- Digital resources
- Mentor Integrated Science (pg. 149)
- Previous ray diagrams
- Mentor Integrated Science (pg. 150)
- Mirror holders
- Screens
- Candles or light sources
- Rulers

- Observation - Ray diagram assessment - Written descriptions

Force and Energy

Curved mirrors - Terms associated with convex mirrors
Curved mirrors - Ray diagrams for convex mirrors
Curved mirrors - Image formation by convex mirrors

By the end of the lesson, the learner should be able to:

- Identify the terms associated with convex mirrors
- Compare the structure of convex mirrors with concave mirrors
- Appreciate the differences between concave and convex mirrors

- Discuss the terms associated with convex mirrors (aperture, center of curvature, pole, principal axis, principal focus, focal length)
- Draw and label the parts of a convex mirror
- Compare terms used in convex mirrors with those in concave mirrors

How does the structure of convex mirrors differ from concave mirrors?

- Mentor Integrated Science (pg. 153)
- Convex mirrors
- Digital resources
- Charts showing the structure of convex mirrors
- Mentor Integrated Science (pg. 154)
- Plain paper
- Rulers
- Pencils
- Drawing instruments
- Mentor Integrated Science (pg. 156)

- Observation - Drawings and labels - Written assignments

Force and Energy

Curved mirrors - Locating images formed by convex mirrors experimentally
Curved mirrors - Applications of curved mirrors (concave mirrors)
Curved mirrors - Applications of curved mirrors (convex mirrors)

By the end of the lesson, the learner should be able to:

- Set up an experiment to locate images formed by convex mirrors
- Record and analyze experimental observations
- Show interest in practical verification of theoretical concepts

- Set up experiments to observe images formed by convex mirrors
- Record observations about the nature, size, and position of images
- Compare experimental results with theoretical predictions

How can we experimentally verify the characteristics of images formed by convex mirrors?

- Mentor Integrated Science (pg. 159)
- Convex mirrors
- Mirror holders
- Objects of various sizes
- Rulers
- Mentor Integrated Science (pg. 161)
- Concave mirrors
- Digital resources
- Examples of devices using concave mirrors
- Mentor Integrated Science (pg. 162)
- Examples of devices using convex mirrors

- Observation - Practical assessment - Written reports

Force and Energy

Curved mirrors - Applications of curved mirrors (parabolic reflectors)
Waves - Meaning of waves
Waves - Generating waves in nature
Waves - Transverse and longitudinal waves

By the end of the lesson, the learner should be able to:

- Identify applications of parabolic reflectors in daily life
- Explain how the focusing properties of parabolic reflectors make them suitable for specific applications
- Show interest in advanced applications of curved mirrors

- Research and discuss applications of parabolic reflectors (solar cookers, car headlamps, photography equipment)
- Explain the special focusing properties of parabolic surfaces
- Demonstrate applications using models or examples

What are the practical applications of parabolic reflectors in our daily lives?

- Mentor Integrated Science (pg. 163)
- Digital resources
- Examples of devices using parabolic reflectors
- Mentor Integrated Science (pg. 166)
- Basin with water
- Small objects to drop in water
- Mentor Integrated Science (pg. 167)
- Rope
- Speakers
- Rice or sand
- Mentor Integrated Science (pg. 169)
- Slinky springs
- Cloth pieces for marking
- Digital resources showing wave motion

- Observation - Oral presentations - Group projects

Force and Energy

Waves - Classifying waves
Waves - Amplitude and wavelength
Waves - Frequency and period

By the end of the lesson, the learner should be able to:

- Classify various waves into transverse and longitudinal categories
- Give examples of transverse and longitudinal waves in nature
- Value the importance of classification in scientific study

- Study different wave examples provided in the textbook
- Classify the waves into transverse and longitudinal categories
- Research and identify real-world examples of both types of waves
- Create a classification chart of common waves

How are waves classified based on particle movement?

- Mentor Integrated Science (pg. 171)
- Digital resources
- Charts showing different wave types
- Wave demonstration equipment
- Mentor Integrated Science (pg. 172)
- Wave diagrams
- Rulers
- Graph paper
- Digital simulations
- Mentor Integrated Science (pg. 173)
- String and masses
- Stopwatches

- Observation - Classification exercises - Oral presentations - Written assignments

Force and Energy

Waves - Practical: Period of waves
Waves - Wave speed
Waves - Phase of waves

By the end of the lesson, the learner should be able to:

- Determine the period of oscillation experimentally
- Calculate frequency from period measurements
- Value precision and accuracy in scientific measurements

- Set up an experiment with a mass on a string
- Time multiple oscillations and calculate average period
- Calculate frequency from period measurements
- Record and analyze results

How is the period of oscillation measured experimentally?

- Mentor Integrated Science (pg. 175)
- Stands with clamps
- Strings
- Masses
- Stopwatches
- Mentor Integrated Science (pg. 176)
- Calculators
- Wave speed problems
- Digital resources
- Wave demonstration equipment
- Mentor Integrated Science (pg. 178)
- Strings and identical masses
- Graph paper

- Observation - Practical assessment - Data analysis - Written reports

Force and Energy

Waves - Oscillation in phase
Waves - Oscillation out of phase
Waves - Characteristics of waves: straight-line motion
Waves - Characteristics of waves: reflection

By the end of the lesson, the learner should be able to:

- Set up pendulums oscillating in phase
- Compare the displacement-time graphs of in-phase oscillations
- Show curiosity in investigating wave phenomena

- Set up identical pendulums oscillating in phase
- Record period and create displacement-time graphs
- Analyze the characteristics of in-phase oscillations
- Compare theoretical and experimental results

What are the characteristics of oscillations that are in phase?

- Mentor Integrated Science (pg. 179)
- Pendulum apparatus
- Stopwatches
- Measuring equipment
- Graph paper
- Mentor Integrated Science (pg. 181)
- Mentor Integrated Science (pg. 183)
- Ripple tank
- Water
- Paper for tracing
- Rulers
- Mentor Integrated Science (pg. 184)
- Metal strips as reflectors
- Paper for tracing wave patterns

- Observation - Practical assessment - Graph construction and analysis - Written reports

Force and Energy

Waves - Characteristics of waves: bending
Waves - Characteristics of waves: diffraction
Waves - Remote sensing in relation to waves
Waves - Transmission, absorption and reflection in remote sensing
Waves - Applications of waves in everyday life

By the end of the lesson, the learner should be able to:

- Demonstrate bending (refraction) of waves in a ripple tank
- Explain how wave speed changes with medium depth
- Show interest in how waves interact with different media

- Set up a ripple tank with shallow and deep regions
- Generate waves and observe their behavior at the boundary
- Measure and compare wavelengths in different depth regions
- Relate wavelength changes to speed changes

How do waves bend when moving between different media?

- Mentor Integrated Science (pg. 185)
- Ripple tank
- Water
- Glass plate to create shallow region
- Paper for tracing wave patterns
- Mentor Integrated Science (pg. 186)
- Metal barriers with adjustable gaps
- Mentor Integrated Science (pg. 187)
- Digital resources
- Diagrams of remote sensing processes
- Video clips on remote sensing
- Mentor Integrated Science (pg. 188)
- Examples of remote sensing data
- Mentor Integrated Science (pg. 190)
- Examples of wave-based technologies
- Video clips on wave applications

- Observation - Practical assessment - Drawing analysis - Written reports